Question 2
How does E-Z VAC work?
Question 3
Will E-Z VAC pick up leaves?
Question 4
Will E-Z VAC get rid of algae in my pool?
Question 5
Will my skimmer still skim with the cleaner
attached?
Question 6
Do I have to run my pump longer with E-Z VAC?
Question 7
Do I have to take E-Z VAC out when swimming?
Answer 1
E-Z VAC will automatically clean the floor of flat-bottom and
dish-shaped bottom aboveground pools that have a banked or radius
cove.
Answer 2
The way that E-Z VAC works is the key to its reliable, trouble-free
operation. With just one operational moving part, it converts the
water flow generated by your pool's pump into kinetic energy. Here's
how: the water flow first moves the flapper (the only moving part)
to the top position, causing one drive tube to close. Water is drawn
in through the open drive tube, which causes the flapper to move to
the bottom position. This repetitive process creates the motion
which propels E-Z VAC around the pool.
Answer 3
E-Z VAC will vacuum away dirt, small leaves, bugs - just about
anything that may fall into your pool - and deposit them in your
filter for easy disposal.
Answer 4
No. A pool cleaner does not kill the algae; pool chemicals do. E-Z
VAC will clean the dead algae along with other loose debris.
Answer 5
Included with E-Z VAC is an automatic regulator valve which allows
simultaneous skimming and vacuuming. Because E-Z VAC uses only 14
gallons per minute to operate (the lowest flow required for any
suction cleaner), the average pool system will have more than
adequate skimming action with the cleaner attached.
Answer 6
No. You don't have to run your pump any longer with E-Z VAC than
without it.
Answer 7
E-Z VAC is perfectly safe to swim with. If you prefer, E-Z VAC can
easily be disconnected and pulled to one side of the pool or removed
from the pool if you choose. Just be sure not to coil the hose on
your pool deck when doing this. The hose can become bent or kinked
which will hinder the cleaning coverage.